À partir de €393.00
Set of 4 nitrile rubber plates capable of absorbing between 40% and 60% of vibrations from transformer other appliances under voltage. They are positioned in the retention tank to reduce the noise pollution caused by...
SanerBlock™ locking brackets for transformer wheels (set of 2)
Sold by sets of 2, the steel SanerBlock™ locking brackets offered by TECHNIKELEC® are fixed around the wheels. The wheels of dry or oil transformers are held in place by the SanerBlock™ to prevent their displacement.
€272.00
Last items in stock
Reference: SanerBlock-S
Payment by bank transfer and credit card
Delivery policy(edit with the Customer Reassurance module)
| References | Length (mm) | Width (mm) | Height (mm) | Wheel diameter Ø (mm) | Wheel width (mm) |
| SanerBlock-S | 240 | 120 | 35 | from 80 to 125 | up to 50 |
| SanerBlock-M | 320 | 240 | 50 | from 150 to 310 | up to 160 |
Related products
€806.00
Set of 4 stainless steel anti-vibration pads capable of dampen up to 80% of the transformer vibrations transmitted to the ground. The SanerVib80-SL is equipped with a rolling slope to facilitate the installation of...
À partir de €376.00
Set of 4 stainless steel dampers capable of reducing up to 99% of the vibrations transmitted to the ground by dry cast resin or oil electrical transformers. The upper part of the SanerVib99-SG inserted directly under...
À partir de €323.00
Set of 4 stainless steel dampers capable of reducing up to 80% of the transformer vibrations transmitted to the ground. The upper part of the anti vibration pad SanerVib80-SG from TECHNIKELEC inserted directly under...
À partir de €662.00
Set of 4 stainless steel dampers capable of reducing up to 99% of the transformer vibrations transmitted to the ground. The upper part of the SanerVib99 is used to support the wheels of the transformer in order to...
À partir de €391.00
Set of 4 stainless steel dampers capable of reducing up to 80% of the transformer vibrations transmitted to the ground. The upper part of the SanerVib80 is used to support the wheels of the transformer in order to...
€125.00
The PFC-44 pre-filtration system is an essential accessory for limiting the risk of clogging PETRO-PIT® filtration cartridges and guaranteeing optimum drainage of rainwater contaminated with hydrocarbons and esters.
€692.00
Reference replaced by ref: Kit PIT416-inox The PETRO-PIT® filtration set for the drainage of hydrocarbon contaminated rainwater was created to allow you to quickly and easily mount a filter on a metallic retention...
€830.00
The PETRTO-PIT® 416 filtration set for the drainage of hydrocarbon contaminated rainwater was created to allow you to quicklyand easily mount a filter on a metallic retention tank outlet. The products that make up...
À partir de €460.00
The PETRO-PIT® range is composed of cartridges for the filtration of rainwater contaminated with hydrocarbons or esters for small and medium-sized retention tanks and pits. The cartridges solidifie instantly when...
€683.00
Filter cartridge for natural esters type MIDEL EN or FR3 COOPER This PETRO-PIT® is a filter cartridge for rainwater contaminated by natural esters for retention tanks, bund or concrete pits. It allows water to drain...
€8.00
Preparation of the kits in a plastic bag with all the necessary unit items.Without this option, you will receive all items loose in one or several packages depending on the quantity ordered.
€555.00
This PETRO-PIT® 401 filtration set for the drainage of hydrocarbon contaminated rainwater was created to allow you to quickly and easily mount a filter on a metallic retention tank outlet. It is recommended to replace...
€460.00
Anti-hydrocarbon filtration cartridge for mineral transformer oils, petrol, diesel, etc. This PETRO-PIT® 401 is a filter cartridge for rainwater contaminated by mineral oils for retention tanks, bunds or concrete...
Français