€986.00 (tax excl.)
Filter cartridge for hydrocarbon contamined rainwater, the PETRO-PIPE® suitable for average water flows of approximately 16 liters/min. Recognised for its robustness and reliability in industry, it is highly...
Petro-PIT416 hydrocarbon filtration set for metallic retention tank
The PETRTO-PIT® 416 filtration set for the drainage of hydrocarbon contaminated rainwater was created to allow you to quicklyand easily mount a filter on a metallic retention tank outlet.
The products that make up the set can be purchased separately.
€830.00 (tax excl.)
In stock
Delivery within 72h
Reference: Kit PIT416-inox
Payment by bank transfer and credit card
Delivery policy(edit with the Customer Reassurance module)
Part of the SPI® filter technology, the PETRO-PIT® range is the United Kingdom and European reference for hydrocarbon contaminated rainwater filter cartridges for small volume retention.
Easy to use, the PETRO-PIT® SET was created to allow a quickly and easily installation of a filter on a metallic retention tank outlet. It fits on any low point and drain valve. Can be used horizontally or slightly inclined in the direction of flow. The P-PIT416 filter is recommended to be changed between 3 and 5 years.
Patented system, ideal for outdoor retention tanks and pits (metallic or concrete).
The filtration set includes:
- 1 P-PIT416 filter for hydrocarbons (petrol, diesel,...),
- 1 PFC-44 pre-filter,
- 1 stainless steel 90° elbow, 1.5" female to be screwed onto the retention,
- 1 stainless steel 1/4 turn valve F/F 1.5",
- 1 roll of teflon to ensure waterproof.
Add the PREPAKIT to your cart to receive your filtration sets in a signle pastic bag with all the necessary unit items; without this option, you will receive the products in "bulk".
SPI® has been an Eastern American manufacturer based in Connecticut for 30 years. Bill Gannon founded SPI® in 1991 to develop a technology for solidifying polluting oils. His experience as Vice President of Liquid Waste Technologies from 1985 to 1991 and the Exxon Valdez disaster in 1989 were key elements in the creation of SPI®.
In the early years, SPI® focused on waste treatment by creating solidifiers for oils (Oil Bond) and for water (WaterBond). Then, in the years that followed, SPI® naturally turned to pollution prevention.
SPI® offers its patented PETRO-PIT®, PETRO-PLUG®, PETRO-PIPE® and PETRO-BARRIER® products to all customers who need to secure their retention equipment with a passive and inexpensive solution, thus allowing good drainage of rainwater without risk of overflow and therefore pollution.
No oil has ever drained from any SPI® filter. SPI® filters comply with American EPA SPCC standards, European and French standards on water treatment in light hydrocarbon separators as well as the water law (hydrocarbon content of water at the filter outlet less than 5 ppm , ICPE compliant). For three decades, thousands of installations have been protected by SPI® products in North America, Europe and Latin America. Its approval with the largest petrochemical industries, power companies and local authorities gives it an obvious strength to innovate in the filtration and solidification of new pollutants (natural esters FR3-COPPER, synthetic esters MIDEL7131) and find the solution for which you need.
Customers who bought this product also bought:
€358.00 (tax excl.)
Small pre-filtration box for PETRO-PIPE® : an essential complement to the PETRO-PIPE® filters. Placed upstream of the filter cartridges, it protects them from impurities present in the water (mud, sand, leaves, etc.)...
€8.00 (tax excl.)
Preparation of the kits in a plastic bag with all the necessary unit items.Without this option, you will receive all items loose in one or several packages depending on the quantity ordered.
€125.00 (tax excl.)
The PFC-44 pre-filtration system is an essential accessory for limiting the risk of clogging PETRO-PIT® filtration cartridges and guaranteeing optimum drainage of rainwater contaminated with hydrocarbons and esters.
€176.00 (tax excl.)
Specific stainless steel parts for PETRO-PIT® to assemble a filtration set on a metallic retention tank or SUNGROW'S inverter type.
€555.00 (tax excl.)
This PETRO-PIT® 401 filtration set for the drainage of hydrocarbon contaminated rainwater was created to allow you to quickly and easily mount a filter on a metallic retention tank outlet. It is recommended to replace...
€125.00 (tax excl.)
This 1.5" fixing kit is to be screwed onto the PETRO-PIT® filter cartridges. It allows a quick and easy installation on a metal retention tank or concrete pit, ready to drain oil contaminated water from transformers.
Related products
€145.00 (tax excl.)
The BRAD® protects SPI PETRO PIT® and PETRO PIPE® filters and pre-filters against accidental impact, as well as any other filters installed on photovoltaic skids, retention tanks or concrete pits fitted with filter...
€880.00 (tax excl.)
This PETRO-PIT® 416 filtration set for the drainage of hydrocarbon contaminated rainwater has been designed to enable you to quickly fit a filter to a flexible tank outlet. The products in the set can be purchased...
€555.00 (tax excl.)
This PETRO-PIT® 401 filtration set for the drainage of hydrocarbon contaminated rainwater was created to allow you to quickly and easily mount a filter on a metallic retention tank outlet. It is recommended to replace...
€1,272.00 (tax excl.)
The PETRO-PIT® 420-SYNBLOC filtration set for the drainage of synthetic esters contaminated rainwater was created to allow you to quickly and easily mount a filter on a metallic retention tank outlet. The products...
€8.00 (tax excl.)
Preparation of the kits in a plastic bag with all the necessary unit items.Without this option, you will receive all items loose in one or several packages depending on the quantity ordered.
€880.00 (tax excl.)
The PETRO-PIT® 416-FR3 filtration set for the drainage of natural ester oil contaminated rainwater was created to allow you to quickly and easily mount a filter on a metallic retention tank outlet. The products that...
€125.00 (tax excl.)
The PFC-44 pre-filtration system is an essential accessory for limiting the risk of clogging PETRO-PIT® filtration cartridges and guaranteeing optimum drainage of rainwater contaminated with hydrocarbons and esters.
€692.00 (tax excl.)
Reference replaced by ref: Kit PIT416-inox The PETRO-PIT® filtration set for the drainage of hydrocarbon contaminated rainwater was created to allow you to quickly and easily mount a filter on a metallic retention...
€830.00 (tax excl.)
The PETRTO-PIT® 416 filtration set for the drainage of hydrocarbon contaminated rainwater was created to allow you to quicklyand easily mount a filter on a metallic retention tank outlet. The products that make up...
À partir de €460.00 (tax excl.)
The PETRO-PIT® range is composed of cartridges for the filtration of rainwater contaminated with hydrocarbons or esters for small and medium-sized retention tanks and pits. The cartridges solidifie instantly when...
€683.00 (tax excl.)
Filter cartridge for natural esters type MIDEL EN or FR3 COOPER This PETRO-PIT® is a filter cartridge for rainwater contaminated by natural esters for retention tanks, bund or concrete pits. It allows water to drain...
€8.00 (tax excl.)
Preparation of the kits in a plastic bag with all the necessary unit items.Without this option, you will receive all items loose in one or several packages depending on the quantity ordered.
€555.00 (tax excl.)
This PETRO-PIT® 401 filtration set for the drainage of hydrocarbon contaminated rainwater was created to allow you to quickly and easily mount a filter on a metallic retention tank outlet. It is recommended to replace...
€460.00 (tax excl.)
Anti-hydrocarbon filtration cartridge for mineral transformer oils, petrol, diesel, etc. This PETRO-PIT® 401 is a filter cartridge for rainwater contaminated by mineral oils for retention tanks, bunds or concrete...
Français