This PETRO-PIT® 401 filtration set for the drainage of hydrocarbon contaminated rainwater was created to allow you to quickly and easily mount a filter on a metallic retention tank outlet. It is recommended to replace the P-PIT401 filter cartridge every year.
The products that make up the set can be purchased separately.
| Size | XS | S | M | L |
|---|---|---|---|---|
| Euro | 32/34 | 36 | 38 | 40 |
| USA | 0/2 | 4 | 6 | 8 |
| Bust(in) | 31-32 | 33 | 34 | 36 |
| Bust(cm) | 80.5-82.5 | 84.5 | 87 | 92 |
| Waist(in) | 24-25 | 26 | 27 | 29 |
| Waist(cm) | 62.5-64.5 | 66.5 | 69 | 74 |
| Hips(in) | 34-35 | 36 | 37 | 39 |
| Hips(cm) | 87.5-89.5 | 91.5 | 94 | 99 |
With your arms relaxed at your sides, measure around the fullest part of your chest.
Measure around the narrowest part of your natural waist, generally around the belly button. To ensure a comfortable fit, keep one finger between the measuring tape and your body.
Part of the SPI® filter technology, the PETRO-PIT® range is the United Kingdom and European reference for hydrocarbon contaminated rainwater filter cartridges for small volume retention.
Easy to use, the PETRO-PIT® SET was created to allow a quickly and easily installation of a filter on a metallic retention tank outlet. It fits on any low point and drain valve. Can be used horizontally or slightly inclined in the direction of flow. It is recommended to replace the P-PIT401 filter cartridge every year.
Patented system, ideal for outdoor retention tanks and pits (metallic or concrete).
The filtration set includes:
- 1 P-PIT401 filter for hydrocarbons (petrol, diesel,...),
- 1 PFC-44 pre-filter,
- 1 stainless steel 90° elbow, 1.5" female to be screwed onto the retention,
- 1 stainless steel 1/4 turn valve F/F 1.5",
- 1 roll of teflon to ensure waterproof.
Add the PREPAKIT to your cart to receive your filtration sets in a single pastic bag with all the necessary unit items; without this option, you will receive the products in "bulk".
SPI® has been an Eastern American manufacturer based in Connecticut for 30 years. Bill Gannon founded SPI® in 1991 to develop a technology for solidifying polluting oils. His experience as Vice President of Liquid Waste Technologies from 1985 to 1991 and the Exxon Valdez disaster in 1989 were key elements in the creation of SPI®.
In the early years, SPI® focused on waste treatment by creating solidifiers for oils (Oil Bond) and for water (WaterBond). Then, in the years that followed, SPI® naturally turned to pollution prevention.
SPI® offers its patented PETRO-PIT®, PETRO-PLUG®, PETRO-PIPE® and PETRO-BARRIER® products to all customers who need to secure their retention equipment with a passive and inexpensive solution, thus allowing good drainage of rainwater without risk of overflow and therefore pollution.
No oil has ever drained from any SPI® filter. SPI® filters comply with American EPA SPCC standards, European and French standards on water treatment in light hydrocarbon separators as well as the water law (hydrocarbon content of water at the filter outlet less than 5 ppm , ICPE compliant). For three decades, thousands of installations have been protected by SPI® products in North America, Europe and Latin America. Its approval with the largest petrochemical industries, power companies and local authorities gives it an obvious strength to innovate in the filtration and solidification of new pollutants (natural esters FR3-COPPER, synthetic esters MIDEL7131) and find the solution for which you need.
Please sign in first.
Sign in
Français