Set of housing to cast with PETRO-PIPE® hydrocarbon filtration cartridge to be recessed for concrete pit

PETRO-PIPE® filtration cartridge with housing set for hydrocarbon contaminated rainwater is to be cast in your concrete retention pit: suitable for average water flows of approximately 16 liters/min.

Recognised for its robustness and reliability in industry, it is highly recommended for civil engineering applications, retention tanks, concrete pits, bunds and electrical substations. Preferably installed a 25° angle inclination.

Read more
In stock
Size chart
Women's clothing size
Euro 32/34 36 38 40
USA 0/2 4 6 8
Bust(in) 31-32 33 34 36
Bust(cm) 80.5-82.5 84.5 87 92
Waist(in) 24-25 26 27 29
Waist(cm) 62.5-64.5 66.5 69 74
Hips(in) 34-35 36 37 39
Hips(cm) 87.5-89.5 91.5 94 99
How To Measure Your Bust

With your arms relaxed at your sides, measure around the fullest part of your chest.

How To Measure Your Waist

Measure around the narrowest part of your natural waist, generally around the belly button. To ensure a comfortable fit, keep one finger between the measuring tape and your body.


Part of the SPI® filter technology, the PETRO-PIPE® is the international range of SPI® products. Patented filtration cartridge for hydrocarbon contaminated rainwater, this set is ideal for concrete retention pits.

PIFH616 consists of a PVC housing (PIH716) to be cast at the low point of your concrete retention pit, which will accommodate the filtration cartridge (PIF616) to retain traces of hydrocarbons contained in the drainage water.
To hold the cartridge in place, fasten the two equipments together using screws (included) in the holes specially designed for this purpose.

Designed for medium flow rates (16 liters/min  for daily use, is highly recommended to change the cartridge every 5 years to guaranty its correct solidification properties.

To avoid premature clogging of the filter by impurities in the water, fix a PFB0810 or PFB1012 pre-filtration box upstream of the filter (not included).
To screw the filter directly onto the retention tanks, use the PI616M2 (2" valve and elbow fixing).
Read more
Product Details
Product details
Reference Length (mm)  Width Ø (mm)   Weight (kg)
 PIH716 450 200 1
 PIF616 450 150 3

PFB pre-filtration box must be purchased separately.

Product videos


SPI® has been an Eastern American manufacturer based in Connecticut for 30 years. Bill Gannon founded SPI® in 1991 to develop a technology for solidifying polluting oils. His experience as Vice President of Liquid Waste Technologies from 1985 to 1991 and the Exxon Valdez disaster in 1989 were key elements in the creation of SPI®.

In the early years, SPI® focused on waste treatment by creating solidifiers for oils (Oil Bond) and for water (WaterBond). Then, in the years that followed, SPI® naturally turned to pollution prevention.

SPI® offers its patented PETRO-PIT®, PETRO-PLUG®, PETRO-PIPE® and PETRO-BARRIER® products to all customers who need to secure their retention equipment with a passive and inexpensive solution, thus allowing good drainage of rainwater without risk of overflow and therefore pollution.

No oil has ever drained from any SPI® filter. SPI® filters comply with American EPA SPCC standards, European and French standards on water treatment in light hydrocarbon separators as well as the water law (hydrocarbon content of water at the filter outlet less than 5 ppm , ICPE compliant). For three decades, thousands of installations have been protected by SPI® products in North America, Europe and Latin America. Its approval with the largest petrochemical industries, power companies and local authorities gives it an obvious strength to innovate in the filtration and solidification of new pollutants (natural esters FR3-COPPER, synthetic esters MIDEL7131) and find the solution for which you need.

Customers who bought this product also bought:
Related products
TECHNIKELEC PI620-SYNBLOC filter cartridge for drainage of rainwater polluted with synthetic esters
PETRO-PIPE® synthetic esters filter for drainage of retention tanks (Ø inlet : 2'' male)
Foam and maintenance mesh for hydrocarbons drainage
Internal filter replacement for PETRO-PIPE® filter (set of 4)
Pre-filter to limit the risk of clogging the P-PIPE filter with foam and mesh TECHNIKELEC
Large pre-filtration box for PETRO-PIPE® cartridges
PETRO-PIPE® PIF616 cartridge for filtration of water contaminated with hydrocarbons for concrete retention tanks TECHNIKELEC
PETRO-PIPE® PIF616 hydrocarbon filter cartridge to slide into the housing
PI616-FR3 filtration cartridge for drainage of rainwater polluted with natural esters TECHNIKELEC
PETRO-PIPE® natural esters filter for drainage of retention tank (Ø inlet : 2'' male)
PFB0810 Pre-filter to limit the risk of clogging the P-PIPE filter with foam and mesh TECHNIKELEC
Small pre-filtration box for PETRO-PIPE® cartridges
PI616M2 filtration cartridge for drainage of hydrocarbon-polluted rainwater TECHNIKELEC
PETRO-PIPE® Hydrocarbon filtration cartridge for drainage of oil bund and retention pit
Click for more products.
No produts were found.



Click for more products.
No produts were found.


Click for more products.
No produts were found.