Petro-PIT420-SYNBLOC synthetic esters filtration set for retention tank
PETRO-PIT® filtration set for the drainage of synthetic esters contaminated rainwater was created to allow you to quickly and easily mount a filter on a metallic retention tank outlet.
The products that make up the set can be purchased separately.
WORLDWIDE EXCLUSIVITY
Women's clothing size
| Size | XS | S | M | L |
|---|---|---|---|---|
| Euro | 32/34 | 36 | 38 | 40 |
| USA | 0/2 | 4 | 6 | 8 |
| Bust(in) | 31-32 | 33 | 34 | 36 |
| Bust(cm) | 80.5-82.5 | 84.5 | 87 | 92 |
| Waist(in) | 24-25 | 26 | 27 | 29 |
| Waist(cm) | 62.5-64.5 | 66.5 | 69 | 74 |
| Hips(in) | 34-35 | 36 | 37 | 39 |
| Hips(cm) | 87.5-89.5 | 91.5 | 94 | 99 |
With your arms relaxed at your sides, measure around the fullest part of your chest.
Measure around the narrowest part of your natural waist, generally around the belly button. To ensure a comfortable fit, keep one finger between the measuring tape and your body.
Part of the SPI® filter technology, the PETRO-PIT® range with synthetic esters is a worldwide exclusivity. It is the European benchmark for synthetic esters contaminated rainwater filtration cartridges for small retention volumes.
Easy to use, the PETRO-PIT® SET was created to allow a quickly and easily installation of a filter on mettalic retention tank outlet. It fits on any low point and drain valve. Use horizontally or slightly inclined in the direction of flow.
Patented system, ideal for outdoor retention tank and pits (metallic or concrete).
The only synthetic ester filter on the market to have passed independent laboratory tests (Bureau Veritas and TÜV) guaranteeing water discharge with an oil concentration of less than 5 ppm.
The filtration set includes:
- 1 P-PIT420-SYNBLOC filter for synthetic esters (type MIDEL 7131, ENVIROTEMPS 360,...),
- 1 PFC-44 pre-filter,
- 1 stainless steel 90° elbow, 1.5" female to be screwed onto the retention,
- 1 stainless steel 1/4 turn valve F/F 1.5",
- 1 roll of teflon to ensure waterproof.
Add the PREPAKIT to your cart to receive your filtration sets in a signle pastic bag with all the necessary unit items; without this option, you will receive the products in "bulk".
SPI® has been an Eastern American manufacturer based in Connecticut for 30 years. Bill Gannon founded SPI® in 1991 to develop a technology for solidifying polluting oils. His experience as Vice President of Liquid Waste Technologies from 1985 to 1991 and the Exxon Valdez disaster in 1989 were key elements in the creation of SPI®.
In the early years, SPI® focused on waste treatment by creating solidifiers for oils (Oil Bond) and for water (WaterBond). Then, in the years that followed, SPI® naturally turned to pollution prevention.
SPI® offers its patented PETRO-PIT®, PETRO-PLUG®, PETRO-PIPE® and PETRO-BARRIER® products to all customers who need to secure their retention equipment with a passive and inexpensive solution, thus allowing good drainage of rainwater without risk of overflow and therefore pollution.
No oil has ever drained from any SPI® filter. SPI® filters comply with American EPA SPCC standards, European and French standards on water treatment in light hydrocarbon separators as well as the water law (hydrocarbon content of water at the filter outlet less than 5 ppm , ICPE compliant). For three decades, thousands of installations have been protected by SPI® products in North America, Europe and Latin America. Its approval with the largest petrochemical industries, power companies and local authorities gives it an obvious strength to innovate in the filtration and solidification of new pollutants (natural esters FR3-COPPER, synthetic esters MIDEL7131) and find the solution for which you need.
Français