€54.00
The small E/COVER is a high temperature vulcanized silicone cover designed to adapt to bushings and bushings. These insulating covers are designed to prevent breakdowns caused by birds on substation and distribution...
MIDSUN® HVIC cleaning coating for High Voltage Insulators (3 liters)
An unparalleled flashover protection
MIDSUN® HVIC silicone coating extends the life of your insulators and increases their reliability at a lower cost. It prevents the appearance of excessive leakage currents, the elongation of discharges and the initiation of arcing, thus minimizing maintenance requirements.
In case you need several pots of HVIC, please contact our sales department.
€616.00
In stock
Category 3 carrier
Reference: HVIC01G03
.png)
Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
A reliable service:
The excellent performance of MIDSUN® HVIC RTV (Room Temperature Vulcanizing) silicone rubber coating is due to its unique hydrophobicity and adhesion properties, which have protective properties against flashover and electric shock. The excellent hydrophobicity of the coating prevents the formation of a deposit of contaminants on the surface. It allows to replace the traditional silicone grease which has the disadvantage of having to be changed frequently.
The HVIC silicone coating is resistant to UV radiation, temperature variations, corrosive environments and aluminium, or ATH pitting from dry band arcing. The coating is also highly water repellent, so contaminants cannot film over the surface. It offers a long-term solution to flashover problems.
Each 3.7L pot covers 8m² to 11m² with a two-coat application depending on the film thickness.
Easy to use, it can be applied with a paintbrush, roll or sprayer without dilution.
The HVIC Silicone Coating can eliminate or reduce:
- regular insulator washing,
- periodic re-application of grease,
- replacement of components damaged by flashovers,
- repair silicone sheds and rod damage on composite insulation systems.
Mainly used in polluted sites such as steel mills, cement plants, quarries but also littoral or petrochemical sites, etc...
MIDSUN® Group is a North American manufacturer of RTV insulation, anti-corrosion silicone coatings and wildlife purlin covers. It is considered a dominant player in this niche market throughout the United States of America.
Founded in 1992, MIDSUN® has grown steadily with the sole objective of becoming the best supplier of products and services to the electric utility and telecommunications industries. In the relatively narrow niche of insulation and bird protection, MIDSUN® excels in terms of products, service, price, performance and delivery. Through its international network of distributors, MIDSUN® provides companies around the world with services and products that increase reliability and save companies millions of Euros in repairs.
Related products
€220.00
The E/COVER is a high temperature vulcanized silicone cover designed to adapt to bushings and bushings. These insulating covers are designed to prevent breakdowns caused by birds on substation and distribution...
À partir de €716.00
MIDSUN® E/PEINTISO insulating paint increases the insulation and dielectricity of the material to which it is applied. Made of silicone, it reduces or even eliminates the phenomena of leakage current and arcing, thus...
À partir de €1,160.00
The E/PLAQUE is a silicone sheet used to protect a variety of distribution and substation equipment up to 35 kV between phase and earth. This flexible silicone rubber plate provides high quality electrical insulation...
À partir de €598.00
The E/FOURREAU is a silicone sheath used to protect a variety of distribution and substation equipment up to 35 kV between phase and earth. This flexible silicone rubber sheath provides high quality electrical...
À partir de €107.00
MIDSUN® E/TAPE is a highly resistant arc flash tape. Composed of self-fusing inorganic silicone rubber wound on an easy-to-separate and tear-off film, it is an excellent electrical protection against phase-to-earth,...
À partir de €616.00
An unparalleled flashover protection MIDSUN® HVIC silicone coating extends the life of your insulators and increases their reliability at a lower cost. It prevents the appearance of excessive leakage currents, the...
€125.00
The PFC-44 pre-filtration system is an essential accessory for limiting the risk of clogging PETRO-PIT® filtration cartridges and guaranteeing optimum drainage of rainwater contaminated with hydrocarbons and esters.
€692.00
Reference replaced by ref: Kit PIT416-inox The PETRO-PIT® filtration set for the drainage of hydrocarbon contaminated rainwater was created to allow you to quickly and easily mount a filter on a metallic retention...
À partir de €460.00
The PETRO-PIT® range is composed of cartridges for the filtration of rainwater contaminated with hydrocarbons or esters for small and medium-sized retention tanks and pits. The cartridges solidifie instantly when...
€830.00
The PETRTO-PIT® 416 filtration set for the drainage of hydrocarbon contaminated rainwater was created to allow you to quicklyand easily mount a filter on a metallic retention tank outlet. The products that make up...
€683.00
Filter cartridge for natural esters type MIDEL EN or FR3 COOPER This PETRO-PIT® is a filter cartridge for rainwater contaminated by natural esters for retention tanks, bund or concrete pits. It allows water to drain...
€8.00
Preparation of the kits in a plastic bag with all the necessary unit items.Without this option, you will receive all items loose in one or several packages depending on the quantity ordered.
€595.00
Anti-hydrocarbon filtration cartridge for mineral transformer oils, petrol, diesel, etc. This PETRO-PIT® 416 is a filter cartridge to drain rainwater contaminated by mineral oils for retention tanks, bunds or...
€442.00
The temperature relay T154 with digital display is a microprocessor-based electronic device or temperature monitoring and control of dry transformers encapsulated.
Français