Pre-filter PFC-44 for PETRO-PIT®
This prefilter is an important accessory for a correct filtration of all PETRO-PIT® filters.
Women's clothing size
With your arms relaxed at your sides, measure around the fullest part of your chest.
Measure around the narrowest part of your natural waist, generally around the belly button. To ensure a comfortable fit, keep one finger between the measuring tape and your body.
Patented filtration system belonging to the technology SPI® the range PETRO-PIT® is the United Kingdom and European reference rainwater filter for hydrocarbons contaminated waters in small retention volumes.
PETRO-PIT® 410 and its prefilter PFC-44 is an ideal solution for exterior retention tanks (flexibles tarpaulin, metal or concrete)
Easy to install thanks to its KIT PETRO PIT to any existing valve or concrete bund.
Use horizontal or slightly inclined in direction of the flow.
The only filter on the market recognized from more than 10 years by the biggest UK and European industry (Network rail, Balfour Beatty, ABB, SIEMENS, SCHNEIDER…) and having passed successfully the test by independent laboratories such as Bureau Veritas or TUV with a hydrocarbons rate in output of the filter below 5 ppm.
SPI has been an Eastern American manufacturer based in Connecticut for 30 years. Bill Gannon founded SPI in 1991 to develop a technology for solidifying polluting oils. His experience as Vice President of Liquid Waste Technologies from 1985 to 1991 and the Exxon Valdez disaster in 1989 were key elements in the creation of SPI.
In the early years, SPI focused on waste treatment by creating solidifiers for oils (Oil Bond) and for water (WaterBond). Then, in the years that followed, SPI naturally turned to pollution prevention.
SPI markets its patented Petro-Barrier, Petro-Plug and Petro-Pipe products to all customers who need to secure their retention equipment with a passive and inexpensive solution, thus allowing good drainage of rainwater without risk of overflow and therefore pollution.
No oil has ever drained from any SPI filter. SPI filters comply with American EPA SPCC standards, European and French standards on water treatment in light hydrocarbon separators as well as the water law (hydrocarbon content of water at the filter outlet less than 5 ppm , ICPE compliant). For three decades, thousands of installations have been protected by SPI products in North America, Europe and Latin America. Its approval with the largest petrochemical industries, power companies and local authorities gives it an obvious strength to innovate in the filtration and solidification of new pollutants (natural esters FR3-COPPER, synthetic esters MIDEL7131) and find the solution for which you need.