The PETRTO-PIT® filtration set for the drainage of hydrocarbon contaminated rainwater was created to allow you to quicklyand easily mount a filter on a metallic retention tank outlet.
The products that make up the set can be purchased separately.
| Size | XS | S | M | L |
|---|---|---|---|---|
| Euro | 32/34 | 36 | 38 | 40 |
| USA | 0/2 | 4 | 6 | 8 |
| Bust(in) | 31-32 | 33 | 34 | 36 |
| Bust(cm) | 80.5-82.5 | 84.5 | 87 | 92 |
| Waist(in) | 24-25 | 26 | 27 | 29 |
| Waist(cm) | 62.5-64.5 | 66.5 | 69 | 74 |
| Hips(in) | 34-35 | 36 | 37 | 39 |
| Hips(cm) | 87.5-89.5 | 91.5 | 94 | 99 |
With your arms relaxed at your sides, measure around the fullest part of your chest.
Measure around the narrowest part of your natural waist, generally around the belly button. To ensure a comfortable fit, keep one finger between the measuring tape and your body.
Part of the SPI® filter technology, the PETRO-PIT® range is the United Kingdom and European reference for hydrocarbon contaminated rainwater filter cartridges for small volume retention.
Easy to use, the PETRO-PIT® SET was created to allow a quickly and easily installation of a filter on a metallic retention tank outlet. It fits on any low point and drain valve. Can be used horizontally or slightly inclined in the direction of flow.
Patented system, ideal for outdoor retention tanks and pits (metallic or concrete).
The filtration set includes:
- 1 P-PIT416 filter for hydrocarbons (petrol, diesel,...),
- 1 PFC-44 pre-filter,
- 1 stainless steel 90° elbow, 1.5" female to be screwed onto the retention,
- 1 stainless steel 1/4 turn valve F/F 1.5",
- 1 roll of teflon to ensure waterproof.
Add the PREPAKIT to your cart to receive your filtration sets in a signle pastic bag with all the necessary unit items.
SPI has been an Eastern American manufacturer based in Connecticut for 30 years. Bill Gannon founded SPI in 1991 to develop a technology for solidifying polluting oils. His experience as Vice President of Liquid Waste Technologies from 1985 to 1991 and the Exxon Valdez disaster in 1989 were key elements in the creation of SPI.
In the early years, SPI focused on waste treatment by creating solidifiers for oils (Oil Bond) and for water (WaterBond). Then, in the years that followed, SPI naturally turned to pollution prevention.
SPI markets its patented Petro-Barrier, Petro-Plug and Petro-Pipe products to all customers who need to secure their retention equipment with a passive and inexpensive solution, thus allowing good drainage of rainwater without risk of overflow and therefore pollution.
No oil has ever drained from any SPI filter. SPI filters comply with American EPA SPCC standards, European and French standards on water treatment in light hydrocarbon separators as well as the water law (hydrocarbon content of water at the filter outlet less than 5 ppm , ICPE compliant). For three decades, thousands of installations have been protected by SPI products in North America, Europe and Latin America. Its approval with the largest petrochemical industries, power companies and local authorities gives it an obvious strength to innovate in the filtration and solidification of new pollutants (natural esters FR3-COPPER, synthetic esters MIDEL7131) and find the solution for which you need.
Please sign in first.
Sign in
Français