Hydrocarbon filter

SPI® hydrocarbon and ester oil separator water filter cartridges

When industrial equipment with an oil sump is placed outside and exposed to the weather, rainwater can fill this secondary containment. To avoid the risk of overflow in the event of rain and simultaneous oil leakage, the retention tank must be equipped with a system capable of filtering and continuously discharging rainwater while retaining the hydrocarbons inside the secondary containment. The discharged water must not be contaminated with more than 5 ppm of hydrocarbons according to EN 858-1 ("light liquid separation systems").

To achieve this, we offer prefabricated hydrocarbon separators specially designed for hydrocarbons and esters and hydrocarbon water filters that operate either by gravity, i.e. without electricity and self-locking, or pumped systems equipped with level detectors and alarms.

Oil separator Pit full of water and oil Leakage under construction equipment Pollution of a water body
Fuite d'huile de transformateur en extérieur Dans la fosse, eau pluviale polluée par l'huile Engins de chantier perdant de l'huile lavage des engins de chantier Pluie, impact sur les plans d'eau proches irisation visible sur l'eau

The SPI® range has been specially developed to suit all flow rates from 3 to over 1500 litres/min, either as passive filter cartridges or with the help of pumps for higher flow rates.

Read more
Close
Click for more products.
No produts were found.

Menu

Settings

Click for more products.
No produts were found.

Settings

Click for more products.
No produts were found.